If you own a 1999–2005 Mazda Miata NB, you already know the engine bay is one of the best parts of the car to show off. The NB is compact, clean, and purpose-built — which makes it one of the most satisfying platforms to detail. The problem is that factory steel hardware rusts, fades, and dulls out over time, and it takes the rest of your engine bay presentation down with it.
Fast Turn Fittings now offers a full lineup of titanium dress up hardware kits engineered specifically for the NB Miata — including Stage 1 and Stage 2 engine bay kits, a hood hardware kit, and seven color finish options. Whether you're doing your first engine bay build or finishing off a long-term project, these kits give you a clean, uniform titanium finish without the guesswork.
Why Titanium Hardware for Your NB Miata?
Most dress up bolt kits on the market use stainless steel or anodized aluminum. Both look good out of the box, but neither holds up the way titanium does over the long term. Grade 5 titanium — specifically the 6AL-4V alloy used in every Fast Turn kit — is stronger than steel at a fraction of the weight, naturally corrosion-resistant, and won't rust regardless of what your engine bay throws at it.
For the NB specifically, that matters. These cars are daily driven, tracked, autocrossed, and taken to shows. The hardware needs to hold up through all of it. Titanium does.
NB Miata Dress Up Hardware Kits — What's Available
Fast Turn currently offers three kits for the 1999–2005 Mazda Miata NB, each designed and test-fit on an actual NB chassis for confirmed OEM fitment — no modification required.
Stage 1 Titanium Engine Bay Kit
Stage 1 — Coverage & Contents
18 Titanium Bolts 12 Flat Washers 2 Flange Nuts 0.2285 lbs.
Covers the highest-visibility locations: headlight mounts, fenders, and radiator holds/stays. The right starting point if you're new to dress up hardware or building out your NB in stages.
The Stage 1 kit targets the areas most people see first when the hood goes up. At 0.2285 lbs., it's a lightweight upgrade that makes an immediate visual difference without committing to a full engine bay build in one shot.
Shop Stage 1 Kit — Mazda Miata NB (1999-2005) →
Stage 2 Titanium Engine Bay Kit
Stage 2 — Coverage & Contents
30 Titanium Bolts 17 Flat Washers 10 Flange Nuts 0.4125 lbs.
Covers twelve locations across the full engine bay: fenders, headlights, radiator stays, strut towers, coolant reservoir, fuse box, A/C hardline brackets, radiator fans, windshield washer reservoir, radiator shroud, hood prop bracket, and hood latch.
Stage 2 is the comprehensive option — if you're building a show car, finishing off a long-term project, or just want the complete look in one order, this kit covers the entire engine bay in one shot.
Shop Stage 2 Kit — Mazda Miata NB (1999-2005) →
Titanium Hood Hardware Kit
Hood Kit — Coverage & Contents
4 Titanium Flange Nuts 0.038 lbs.
Covers the hood hinge mounting points — replaces factory steel hardware where the hinges mount to the hood. A small detail most people miss on first glance and notice every time after.
The hood kit pairs directly with either engine bay kit for a complete, uninterrupted titanium finish from the engine bay to the hood. Four fasteners, zero guesswork.
Shop Hood Hardware Kit — Mazda Miata NB (1999-2005) →
Seven Color Finishes — Pick Your Look
Every NB Miata kit is available in seven finish options: Polished, Gold, Blue, Purple, Black, Burned Blue, and Oil Slick. Each finish is backed by Fast Turn's 10-year fade warranty.
Cosmic Burn is the most popular finish right now — the shifting iridescent blue-to-purple tones photograph well and stand out in an engine bay without being loud. Polished and Gold are the clean, classic choices. Blue and Purple are strong if you're building around a color-coordinated theme. Black disappears cleanly into a dark engine bay. Oil Slick sits between raw titanium and Cosmic Burn in terms of visual intensity.
Easy Installation for Any Skill Level
Every Fast Turn kit includes installation instructions with every fastener color-matched and size-labeled so you know exactly where each piece goes. There's no fabrication, no modification, no guesswork. If you can swap a bolt, you can install this kit.
The hardware is direct OEM replacement — same mounting locations, same thread specs, drop-in fit. No modification to your car required.
In Stock & Ready to Ship
Shop NB Miata Titanium Hardware Kits
All three kits are in stock now. Browse the full NB Miata lineup — including all available color options — and find the right kit for your build.
